Category Archives: Miniature Kites

Miniature kites are art projects under 12 inches in width, which will fly when pulled through the air or taken out in very mild weather.

A slow week in the kite room.

So work got in the way of the work this week.

On Monday and Tuesday, the day job kicked my butt, and kept me late. So, there was no way that I was going to come into the kite room and tear something up, or try to write in gibberish.

Eventually I did manage to get this gem finished, and cut out all of the kites from this napkin that I posted about last week.

I even made time to post it as a Flyday post on Facebook.

The weekend wasn’t much better. I decided that I really needed to get my steps in on Saturday and a good stretch afterward meant that even though I started the day early enough I didn’t get to work very early. Also some family obligations, struggles with materials, and more calls now that I’m on call again, kept me from getting far.

I stole a moment in an interesting space to record my next Flyday post with a classic kite, but once I made it back home I was out of energy and didn’t push through the fatigue to get back to the kite room.

Sunday wound up a bit better, I got another (and maybe better) stretch in, but skipped the steps so that I could get some work in. In the few hours that I had before the phone began ringing, I overcame the materials issue, and glued framing to the balance of the Hibiscus sails that I had cut from the first napkin and also a bundle of these candle sails.

2 inch miniature shield kite from cocktail napkin

I ran out of energy again before I got any further, and even put off writing this brief update until Monday morning.

Here’s hoping that this week lets me get more done, while my mind is dwelling on the fact that the Washington State International Kite Festival is being held this week, and so many of my friends and chosen family are gathered and filling the air with color.

 

A brief respite?

OK, maybe not respite. I did a few things that were refreshing, but they were also tiring.

While I didn’t finish the Spiderweb package as quickly as I had wanted to, it is available in the store now. They presented a challenge that surprised me a bit, but I love how the package cam together.

I also put together this cute Shield kite to put in a birthday card for another friend. I have worked with the print before, but had only used two colors on a smaller kite. I think that I like the larger kite with three colors better.

I thought that I was about to close out a slow week when I came across yet another package of napkins. I really don’t need any more stock right now, but I was pleased to find these. They reminded me a touch of one that I had received in a grab bag from Ninny’s Napkins, but also I’ve had a friend on my mind that owns the Maui Toy Works, which was destroyed in the shocking wildfire in Lahaina. Some folks in the kiting community have set up a gofundme to help, but I’m tempted to mail them some minis from this print as my little gesture of aid.

Time for something a little bit different

This week, instead of sharing what I’ve been up to in the kite room, I want to detail a kite that I’m especially fond of.

While most of the kites that I make and share are either traditional shapes, or very close to them, I learned from a couple of friends (some years back) that nearly anything framed with 3 sticks can be persuaded to fly. Scott Skinner and Jose Sainz are brilliant kite makers, and if you ever have the opportunity to take their class on 3 stick kites, I think it will be time well spent.

The 3 stick concept is wonderful, especially at the miniature scales, where I’m a little more willing to throw materials away after a failed experiment. Also, if I’m going to play with shapes, I love to explore asymmetry.

Since this particular print has so much going on visually, I thought that it would be fun to continue the deviation from symmetry that I started with the frame to the graphic layout of the sail. Since the napkin is not printed on all the folds, it allowed me to have a large negative space off to one side, while the crazy color blocking dominates the sail.

As if the fun with the shape was not enough, I decided that tearing two of the edges, instead of having the nice clean cuts that I have on most of the traditional shapes, would be good for this project.

At this point, with so many uncertainties, I chose to use more tails than I ordinarily would . This gives me more possibilities for matching the colors in the tail to those in the sail, but also gives me more drag for the sake of stability. Also in the pursuit of reliable flight,  I left the tails looping from one stick across the kite to another.

As I really don’t know the kiting knowledge of the folks that may eventually handle the kite, I put a line across the back of the kite that is already tied at a good place to bow the sail backward to handle the air appropriately. Despite the odd shape of this project it only requires the one bow line, although I have made some that use two.

With the sail, structure, and tails settled, the only remaining step is attaching the flying line. A traditional shape will have the attachment in a specific space along the spine, but with an asymmetrical sail I had the challenge of sorting out the right spot and used some trial and adjustment before I secured the line to the sail.

Once mounted on the card, the kite was mailed out with some thanks for inspiration.

While I have plenty more of the napkin that this kite was made from, it will be the only one that I make that has its precise features and shape. I intend to revisit some of the ideas, but that will require taking time away from other projects.

In the meantime check out the shop to see what kites are currently available to be mailed, or what you can get through a back order.

Rolling along

So, with my youngest away at Scout camp, I did indeed manage to spend a little more time in the kite room. I never get as much done as I want to, but I did keep things rolling along this week.

I started things off with a joke to send off to Scout camp, . Food at the camps is usually good enough, but I got a kick out of the idea of teasing my youngest with the idea of a doughnut, and the napkin that I’ve been playing with let me get this.

I also had fun putting more paper behind the kite than others that I’ve done.

After I got that one ready to mail out, I went back to other parts on that napkin and cut out a veritable flock of flamingos, and then a herd of unicorns to match.

I’ll store some of these away to finish up at another time.

Next, I put together some floral shields for some birthdays over the next week. I managed to get a quick video before sending any of them out.

The ones that are mailed will wind up being a day or so late, but I’m told that it is the thought that counts. Before

Earlier in the week I had made a supply run, in search of something that I couldn’t remember the name of, and tripped across a new glue that I tried out on these florals. I fell in love with the way it works between the bristles that I use for my framing and the tissue of the sail on the miniature kite. I want to see it I can get away with thinning it with water, but will not be put off if that fails to work as well.

I also managed to run myself out of the thread that I use for the bow and flying lines. At about a yard per kite, a spool means about 500 kites.

Next I set about one of the napkins that I found a few weeks ago for Halloween. I really want to have these ready before the holiday, instead of just in time to be late like I have been lately.

I was tickled to discover that the print on this spiderweb pattern is one single graphic, not a repeating print. It has a huge embossed border, but I’m still excited about it.

I considered just dropping a pattern onto the folded napkin and whacking out piles of kites, but I decided to be more judicious with the pattern placement.

This means that each of the kites that will go into these packages will be different. Also, since I got 15 kites from the print, there with probably be a different assortment in each of the boxes of 13 kites.

I’ll try to have the package available within the next week.

Next, I turned to a napkin that my aunt salvaged for me from an event. I had put it aside thinking that I wouldn’t be able to get anything that I liked out of the very full graphics. Turns out that I love the way that part of the text fit the Shield sail.

I also wanted to try this one with some bamboo that my friend Dan Kurahashi had split for me and that new glue. This very successful experiment will go out to that aunt with an apology for my dubiousness and for missing her birthday.

That may be it for now, but I  am pretty happy with all that I managed to get my hands on this week.

A couple little steps forward

This week was another with limited progress in the kite room, this time due to family commitments that even had me taking a day off from the “day job”.

I did make time to wrap up a package of the flamingos that I had posted about a couple weeks ago, that are available on the store now. It looks like I’ll have enough napkins for 8 of the packages. The napkins are still for sale at the store where I found them, so I’m tempted to go buy more of these cuties though.

I’m busy cutting up the rest of the stock with those flamingos and the unicorns, but I set aside just a little time to give a few other recent acquisitions a try.

Here’s a watermelon that had embossing covering all of the rind. I think that the idea still comes through without it. How about you, what do you think? I might make the packages of these from different parts of the napkin, so that each is slightly different. Any thoughts on such an inconsistency?

When I found this flag napkin, I was excited to find something different, but once I got it on the cutting mat I thought that it might just be a little too different.

Trying to find something for this napkin

I’m not in love with the results (the sliver of red at the top kicks at my OCD), but I do like the way it works with two different colored tails. I should have 4 packages of these when I finish them all up.

This array of lunar phases was another napkin that had me excited at first, but proved to challenge me a bit. The phases are stacked so closely together that they don’t fit nicely onto a sail. Here was my first try to squeeze the whole circle onto my smallest sail template.

I was a little more fond of the way that I got this one to fit onto the Shield kite template. This one will go out to a friend that pays more attention to lunar cycles than I do. I’m going to stew on this one for a bit, and see if I come up with any other ideas for the napkin.

With my youngest away at summer camp, I may have more time to spend in the kite room this week, but only time will tell. Stay tuned.

What was that about best laid plans?

This week I don’t have much of an update from the kite room.

I was tempted to skip the post, and let a filler run. After a moment’s reflection I thought it might be better to post despite the tribulations of the week.

I have often mentioned some lack of energy or enthusiasm that will keep me from doing the work, and while there has been a bit of that this week. I put another block in my own path as well.

I am always looking for better ways to do something, and so I decided to spend time and money that I don’t really have on a tool that I hoped would help me cut out sails.

After working through a little trepidation over experimentation, I managed to get the bargain model tool to communicate with my handheld computer, and then it cut a few shapes out from some card stock. This got me excited, as I’ve been holding off making any new star shaped kites, as they are time consuming to cut by hand.

After some interruptions from family obligations, and after-hours calls, I went on to shred some of my napkins using the tool. My hopes are dashed, until and unless I can find some answers on using a Cricut from someone. I’ll keep the tool handy for working with cards, at lest for a while.

I really don’t feel that I have much to show for the week, other than that little adventure. After venting a touch of frustration at the time I had invested, I spent a little time cutting some sails out of the remainder of some napkins to set aside for future grab-bag packages or to use to send to friends and family, and made up one kite from a package that I posted about a couple weeks back to send as a belated birthday greeting for a dear supporter. Unfortunately, I wasn’t thinking too clearly before I dropped that in the mail, so there’s no pictures of that turned out.

I’ll be spending the weekend at dad’s again, so that is the limit of the update.

I’m frustrated that the time and money that I put out for the tool didn’t pay dividends yet, but there is still a little hope. In the mean time, I’ll keep making kites, and mailing them from time to time.

Getting back in the groove

I was pleased to get moving on creative projects again last week, but I wasn’t certain about maintaining that momentum.

After work on Monday, I spent the night at my son’s Scout meeting, and then the bulk of Tuesday was spent on Independence Day activities with his unit as well.
I managed to put in some time in the kite room on each of the rest of the weekday evenings, putting along on the new grab bag. I was tickled with the way a couple of the kites turned out, especially this Koala shield.

2.5 inch miniature shield kite from cocktail napkin mounted on easel card

After wrapping up that package on Saturday, I returned to a birthday themed napkin that I’ve posted about before. Earlier in the week, I had noticed in passing that there was a small part of the graphic that I hadn’t noticed before. It pleased me that I would get to use a little more of this material, but irritated me that I had already tossed what I had considered scraps at the time. I won’t get to make a package with them, but they will make a fun on to include in future grab bags.

Also on Saturday, I was a bit surprised to realize that I needed to liberate more sparring from the whisk broom that it was sold as. Here are a couple pictures of the remnants of the broom, and a bundle of the bristles. I was also pleased to take a little time from the creative work to tidy up the kite room and make it a bit of a better work space.

Sunday started out with me writing up this review of the week, and if I have any energy left after some chores, I’ll return to cut out some more kites.

I’m glad to have maintained some momentum this week, but I’m starting to get concerned over lack of sales. I know that it is summer and many of my kiting friends are busy at festivals hither & yon, but I need to work on grabbing some attention and getting these out the door so that I have better justification for the time and space.

A week to memorialize, but it took a month and more

Well, I was on a roll, and THEN…
The week before Memorial Day rolls around and everybody needed to get their summer projects done. That week at work, besides after-hours calls, needing some of my energy, pretty well wiped me out.

Then the next week saw the last steps in a project that took more than a decade to make happen. While I didn’t have much to do with that project it still took some of me energy, and left me in a funk that prevented me from even trying to be creative.

The next couple of weeks involved lots more hours for the day job, a scout outing that I was told I needed to go on (it energized me on some levels, but left me tired), another trip down to dad’s to move some his renovation forward (again, a good feeling, but golly was I tired, and lots of yard work that required attention before it got further out of hand. All of this left very little energy or time to stop in the kite room, much less get anything done. Add that no one has been placing any orders, and I really have been absent.

I have tripped across a handful of things that made me look forward to getting back to work, though.

In a trip to the grocery store, I was greeted near the door by this cute and colorful napkin.

The unicorn grabbed my attention, because it reminded me of a napkin that I once had from a Ninnys Napkins grab-bag that I had used up for a little girl’s birthday. I was also excited because I had recently started carrying negative templates of the kite patterns, so that I could check them against napkins before I buy them (and to let me know if I needed to buy more than one package).

The dark card that I chose also helps for snapping a quick sketch like these.

While I was toying with the idea of the unicorns, This Flamingo jumped out for some attention, making me think of a former boss of mine. I bought several packages of the napkins, and later learned that they’re printed on all 4 folds, so I’ll get to play with these a whole bunch.

In the mean time, with the creative energy still feeling dim and the reminder of the grab-bags, I decided to gather up several of the odds and ends of miniature kites that I have completed and put together a package that instead of all one pattern, had 13 miniature kites with differing sizes, shapes, and prints. These grab-bag packages will also be $200, even though they can take a little more creative energy.
I managed to put 2 packages together so far, and for the third I’m digging back into that grab-bag for some of the unique prints that I’ve received from Ninnys.

Selection of shapes, sizes, and prints in the next grab-bag that I’ll be putting together soon.

Another trip to the grocery store showed me these two prints. I look forward to seeing just what I can do around the watermelon seeds, and I’m always looking for a patriotic/flag print to make available for the civic holidays. I’ve no idea when I’ll use them, it’s certainly too late to do anything about either of them for this summer’s holidays.

On a trip to the craft store last week for some floss (I always need another color for tails), I made the mistake of turning down an aisle and found brand new product for fall and HALLOWEEN! I’ve never really like Halloween that much (it’s too close to my birthday for my taste), but I do find myself resonating with some of its iconography lately, and have struggled to find prints that I like to work with.
I wound up picking out several napkins that will have varying utility, but I’m excited to have some fun stuff to offer with just about enough time to work them up.

By that point the creative energy was starting to return, but more after-hours calls kept me from doing much with it. Then the weekend started with a long day trip to one of our Scout camps to finish a project (and start 2 more) for the camp rangers. Despite their invitation (and attempts at persuasion) I made it a point to get home, so that I could start using whatever I had left to make some progress in the kite room on Sunday morning.

Some of that energy was used to gather up the grab-bag shown above, and some to finish the Pretty on Pink package, so that I could take that off of backorder.

So clearly, I failed to keep to posting every week. I think that there were perfectly good reasons, but if I’m going to get attention here, I’m going to need to find some fillers to have ready when I just can’t make it to the keyboard.

Did somebody get the number of that bus?

The weather over the weekend was stunning (stunningly, almost stiflingly warm), and that limited what we were able to get done at dad’s property. There’s always some limitation though. I worked nearly until dark before I started on my 4.5 hour trip home, that was more eventful than I care to detail here, although I’ll confess that I only looked at the kite room on Monday morning.

The Scout meeting kept me from the kite room on Monday evening.

Tuesday was spent on recovering enough to continue the day job.

Wednesday was used barely making it to the day job, then unloading the car from the weekend, and collapsing with the vague hope that Thursday would get to better.

Thursday wound up feeling better, but the evening started with one last errand left from the %^@#*~$ weekend. Then just when I thought that I would make it to the kite room (even for a moment). I took two lockout calls in opposite directions that kept me out past bedtime.

Friday I got up and ready quick enough, but between the need for coffee from my fav (and recently, too busy) Dutch Bros. stand, and a visit scheduled for opening at my shop, I couldn’t get caught running late by stopping in the kite room, maybe I’ll get in the after closing.

Well, I finally managed to make it into the kite room on Friday evening, but not much more. This is the kite from the scraps that I was talking about last week, I ran a lockout call right after getting this picture, and didn’t have the motivation to continue once I finished. With some help from my wife, I’ll be calling this one Creamsicle.

2 inch Sotich shield kite from cocktail napkin mounted on easel cards

My malaise continued Saturday morning, I slept in a little too long, finished watching a movie, took a bit too long making breakfast, and finally made it into the kite room just a little before noon.

Some lockouts and more procrastination kept me out of the kite room until after bedtime on Saturday.

On Sunday, I almost got my butt moving, I managed to feign some motivation in the kite room, and then the phone rang again. Lockouts tried to keep me out of the kite room, I did get to spend an hour working, then some time fixing dinner, and then more lockouts instead of having dinner.

So that was a week of trying to get my head together after putting it out there on a long term investment. I shouldn’t make light of an accident with a bus (I know someone that was personally hit by one), but I do feel like one of those cartoon characters with the tweeting birds circling their head. Now to try to get my head together for the coming week.

Is this the Way?

2 inch Sotich Shield kite mounted on easel card

Well, I managed to sneak into the kite room last Friday before heading out to my father’s property, but didn’t update the post.

Here’s the one-off that I made to post for Revenge of the Sixth (the day in May that follows Cinco de Mayo, and any revelry that might entail).

Naturally, I didn’t get any work done while I was away from home, but as my son’s Scout meeting was cancelled on Monday, I did make it into the kite room for a bit (after some yard work). A bit more to do on the Full of Stars shields, and a step or two on the last of the Star Wars themed kites, before I start in on a batch of the Tulip shields.

Tuesday evening, despite digging into the stove to see why it wasn’t lighting (frigging igniter again), and another stab at yard work, I managed to make it into the kite room. Not just made it in, but got to spend a couple hours, before I pooped out.

I finished this cutey, and the Full of Stars shield kites before calling it a night.

Wednesday morning I managed to cut a few of the Tulips before I was called to cut out a 2 inch sail from some of the tissue reaming from that print. I’m excited to get even more out of that package of napkins. Then Wednesday evening, after getting home a few minutes late from a last minute lockout and a bit of time over dinner, I managed a couple hours to finish cutting out the sails from that napkin and even started framing them. My back said that it needed some attention before I got too tired from working, so I didn’t get as much time as I wanted in the kite room.

Thursday morning, I put in a few minutes between getting the kiddo off to school and getting ready for my day at work. I probably wont get much more done this week, as I’m likely to spend all of Thursday night prepping to head back down to my dad’s property for my “weekend off”, but I might get a couple minutes on Friday morning.

Turns out that I made a few minutes on Thursday evening to finish the first of the kites from the aforementioned scrap (pictures will follow) and frame up the last of the Tulips, I hope to have them mounted on cards next week, but didn’t leave time on Friday morning. That’s it for this week, then.

So the question stands.
Is this the Way? Maybe it’s just the May.